Products

magnet, Neodymium 38H, block, 0.118'' x 0.196'' x 0.314'' - epoxy coated - with dimple to print # 9400-2301-001

magnet, Neodymium 38, block, 0.160'' x 0.340'' x 1.000'' - nickel plated

magnet, Neodymium 52, block, 0.187'' x 0.375'' x 0.375'' - Nickel plated - with dimple on south to print # 9400-3752.000

magnet, Neodymium 35, block, 0.200'' x 0.375'' x 0.500'' - nickel plated with 0.095'' diameter hole and 0.200'' diameter x 0.100'' deep counter bor...

magnet, Neodymium 42, block, 0.500'' x 0.500'' x 0.250'' - nickel plated - with #6 counter bore on center on both sides of part

magnet, Neodymium 35, block, 0.250'' x 0.500'' x 0.750'' - nickel plated

magnet, Neodymium 35, block, 0.250'' x 0.680'' x 1.500'' - (bulk pack)

magnet, Neodymium 35, block, 0.250'' x 1.000'' x 4.000'' - nickel plated packed as singles in boxes with labels

magnet, Neodymium 42, Block, 1.000'' x 1.000'' x 0.500'' - nickel plated - with #10 counter bore on center on both sides of part

(Revision: 0) magnet, Neodymium 35, V'-block assembly, 0.500'' x 1.000'' x 1.000'' - 2-pole - dwg: E-5379

Neodymium disc magnet 0.250" dia. x 0.250" thick, nickel plated, Grade 42, hi temp, good up to 302 degrees F.

Retriever Neo/Tel Pen - Retriever Magnet Telescoping NdFeB Pen Hand Tool

1 1/2" x 1/2" x 1/4" thick w/ holes to accept #6 screws counter sunk from btoh sides, grade 42 Ni

magnet, Neodymium 42, channel assembly, 0.380'' x 0.750'' x 2.500'' - 2 #8 counter sunk holes on 1 3/4'' centers - nickel plated

magnet, Neodymium 42, ring, 0.375'' x 0.125'' x 0.125'' - nickel plated - #4 counter sink - North on counter sink face

magnet, Neodymium 42, ring, 0.375'' x 0.125'' x 0.125'' - nickel plated - #4 counter sink - South on counter sink face

magnet, Neodymium 42, ring, 0.500'' - 0.136'' x 0.125'' - nickel plated - with 82 degree counter sink #4 north on face

magnet, Neodymium 42, ring, 0.620'' x 0.170'' x 0.120'' - nickel plated - 0.170'' diameter through hole with #6 on North c-sink face.

magnet, Neodymium 42, ring, 0.620'' x 0.170'' x 0.120'' - nickel plated - 0.170'' diameter through hole with #6 South on c-sink face.

magnet, Neodymium, ring, 0.330'' x .0156'' x 0.400'' - brass encased - screw driver magnet

magnet, Neodymium, ring, 0.330'' x 0.175'' x 0.400'' - brass encased - screw driver magnet

magnet, Neodymium, ring, 0.540'' x 0.283'' x 0.510'' - encased - screw driver magnet - MP-D7

(Revision: 0) tube magnet, Neodymium - 1.000'' diameter x 12.000'' long. 1/4''-20 tapped hole - 7/16'' deep at each end - 12,000 gauss

(Revision: 0) tube magnet, Neodymium - 1.000'' diameter x 14.250'' long 1/4-20 Tapped Both Ends

(Revision: 0) tube magnet, Neodymium - 1.000'' diameter x 4.000'' long. 1/4''-20 tapped hole - 7/16'' deep at each end - 12,000 gauss "TMN-04"

magnet, Neodymium 35H, round, 0.060'' diameter x 0.125'' long. Nickel plated

magnet, Neodymium 35, round, 0.093'' diameter x 0.250'' long - nickel plated

magnet, Neodymium 35, round, 0.110'' diameter x 0.250'' long - nickel plated

magnet, Neodymium 35, round, 0.120'' diameter x 0.060'' long - nickel plated with red dot on North face (bulk pack)

magnet, Neodymium 35, round, 0.125'' diameter x 0.125'' long

magnet, Neodymium 35, round, 0.125'' diameter x 0.125'' long - nickel plated

magnet, Neodymium 30, round, 0.125'' diameter x 0.250'' long

magnet, Neodymium 30, round, 0.125'' diameter x 0.250'' long - nickel plated, actually grade 35 material (bulk pack)

N42 Magnet .125'' Dia x .500'' long Ni plated

magnet, Neodymium 33H, round, 0.157'' diameter x 0.236'' long - nickel plated - high temp grade