|
Magnetic Slide Conveyors
- Beltless
|
|
 Considerations
& Standard Options
|
 |
Standard Options
Everything you’ll need to make your Material Handling,
Automation and Industrial applications as efficient as possible.
Whether your need is
to convey heavy parts, flat oily cutouts, small screws or curled
chips, Storch Magnetic Slide Conveyors can be equipped for efficient
operation under the toughest conditions.
Our list of options includes a wide array of slider plate materials,
all fabricated from #300 Series stainless steel. Depending upon
the application, slider plates will range from 16 gauge for light
duty chip handling to 7 gauge for heavy service parts handling.
In addition, a textured surface plate is available (in 16, 14 and
12 gauge thicknesses) which not only provides added strength but
also eliminates the oil-film cohesion of flat stampings. We also
offer a combination of the two surfaces and a removable, replaceable
impact sheet for the input area of the conveyor, to increase the
life of the base slider plate.
Motor controls range from simple manual on/off
single phase switches to 460 volt 3 phase fused magnetic motor starters
plus controls for variable speed conveyors.
Standard Leg Supports are height adjustable and
removeable. Casters are optional for easy moves. Standard finish
is an enamel paint with options for customer-specified finishes.
A reverse flow hopper for the input area of conveyors is available.
It aids in effective removal of most chips and ferrous contaminant
from the coolant, increasing useful life of the liquid and saving
wear and tear on pumps and machine ways.
 |
 |
|
|
Drive
Mounting Options
Standard
shaft mounted drive arrangements are shown. Optional
top mounted drive with chain drive and safety clutch
can be provided. Conveyors that require a motor 1 HP
and larger will be provided with top mounted gear motor,
roller chain, and safety clutch.
|
|
|
|
|
| |
Standard Conveyor Leg Supports
|
|
|
| |
|
|
|
|
|
Flow chart assumes the following:
|
|
Coolant Capacity
in Gallons / Minute
|
|
|
|
|
|
4210
|
45
|
65
|
|
4212
|
55
|
90
|
|
4214
|
65
|
110
|
|
4216
|
78
|
130
|
|
4218
|
95
|
155
|
|
|
|
|
|
|
|
 |
|
Manual
motor starter with thermal overloads for 110 V,
Single-Phase, 60 Hz for up to 1 HP
|
|
 |
|
Non-reversing
manual motor starter with overload relay size
“0”, NEMA 12 enclosure to 3 HP @ 230
V, or 5 HP @ 460 V, 3-Phase, 60 Hz.
|
|
Combination
magnetic motor starter
- fused disconnect - size 1 NEMA 12 JIC
non-reversing, start/stop pushbuttons, pilot light and
110 V transformer for 230 or 460 V, 3-Phase, 60 Hz.
|
|
|
|
|
