 Storch
Magnetic Blueprint Holders are a valuable tool for keeping
materials such as charts, blueprints and thin plastic or
cloth sheets professionally displayed, organized and safely
put away.
Our Magnetic Holders are inexpensive, strong and decorative,
never out of place in the office, factory or shop. When
not in use, merely leave them on the mounting rails to avoid
loss. They never lose their power and are available in three
distinctive styles and individual holding capacities up
to 90 pounds.
|
|
The 1787 Series
with 23 lb. hold ‡ and 1785 Series with
9 lb. hold ‡ are proven performers that have been
used in harsh work environments for nearly 50 years. Standard
stock colors are black, blue, orange or red.
|
|
|
|
|
Part
Number 1787
Rectangular
|
| |
|
|
|
The T101 Series
is finished in chrome and available in two sizes and holding
values of 35 & 90 lb. ‡
|
|
|
Part
Numbers T101-50 and T101-70
Round
|
|
|
|
The T102 Series
is an economical blue print holder magnet with 12 pound holding
strength. This plastic encased magnet is available in black
or blue. Custom imprinted labels (200 pieces minimum) can
be provided.
|
|
|
|
|
Steel Mounting
Rails - Part 1037
|
|
Made specifically
for Storch Magnetic Blueprint Holders, to provide a strong
surface holding value, the black-oxided rails are 1/8”
thick x 2” wide, and in the noted lengths. *Mounting
holes are drilled and countersunk for #10-24 flat head screws
and are spaced on 16” centers. Pressure sensitive tape
can be used instead of screws for mounting.
|
‡
Holding values shown have been tested for direct pull from
1” thick ground surface mild steel plate. When using
these magnets on oily, irregular, rough, rusty or painted
surfaces or on thin gauge sheet metal, holding values will
be derated. Consult factory for use under these circumstances.
|
