|
Powder, Bulk and Solid Magnets
|
 Plate
Magnet & Crossbelts
|
 |
Plate Magnets
 Protect
your product, people, and processing equipment from damaging ferrous
particles, scrap and tramp metals with Storch high strength plate
magnets providing an effective and low cost solution. Suspended
over your flow, or located directly in the flow line, plate magnets
produce a strong magnetic field separating tramp iron from your
dry flow, maintaining product integrity and quality.
Plate magnets are ideally suited as non-obstructive
magnetic traps in vacuum, pneumatic and gravity duct work systems.
Plate magnets mat be used in light inverted suspended applications
less than 4" burden depths, while Storch Overhead magnetic
separators are recommended for inverted separation greater than
4".
Magnetic Separator Plates easily mount to your chutes,
sloped trays and may be used on vibrating transporter conveyor trays.
Plate Magnets compliment your inline metal detection systems while
recommended upstream to your inline metal detection systems.
Standard and Engineered Plate Magnets alone, or in complete half
or full hump configurations to mount to your duct.
-
60 standard sizes, 4 Thicknesses, 2 Widths with 8" to
84" lengths providing solutions for low and high flow rates,
separating tramp metals.
-
Finest of Magnetic Materials used meeting IMA/MMPA standards.
-
Magnetic Materials are fully magnetized to 100% saturation,
and configured in standard 2 pole or available 3, 4, & 6
polarity optimized circuits to pull, capture and provide tramp
metal removal.
-
Lifetime Guarantee of permanent Magnet Strength. Less than
1% loss in 100 years when properly used.
-
Stainless Steel 304 construction resists corrosion.
-
Some Applications: Glass, Plastics, Wood chips, Food, Grain,
Ingredients, etc.
-
Engineered quality industrial magnetic plates to suit
-
Rare Earth pharmaceutical & food plate magnets available.
-
Many options: Face plates tapered, stepped or smooth, liquid
tight construction, piano hinges, mounting holes, brackets,
supports, and custom duct work.
 Overhead
Suspended Magnets
Storch overhead suspended conveyor line magnets above your conveyor
belt or head pulley greatly reduce potential damage to your processing
equipment while providing effective metal recovery and removal.
-
Permanent Magnet, Lifetime Guarantee of Magnet Strength. Less
than 1% loss in 100 years when properly used
-
Electromagnet models and power supplies
-
Magnet Strength and Sizes manufactured as needed.
-
Super strength conveyor line magnet
-
Engineered high intensity magnetic circuits removes small to
large tramp metal
-
Depth, width and length determined by your air gap, burden
depth, belt speed, and other variables.
-
Available for your belt width to 72"
-
Mounting preferences eye bolts, flanges, brackets available.
Crossbelt & Inline Over Belt Separators
-
A Self Cleaning Magnetic Separator
-
Permanent Magnet or Electromagnet as required
-
Permanent Magnet Lifetime Guarantee of permanent Magnet Strength.
Less than 1% loss in 100 years when properly used
-
Depth, width and length determined by air gap, burden depth,
belt speed, and other variables.
-
Available for your belt width to 72"
-
Mounting preferences eye bolts, flanges, brackets available.
Storch Crossbelt Suspended Separator magnets provide a true self
cleaning industrial magnetics separator systems solution, for continuous
metal recovery from your conveyed materials. The magnetic cross
belt separator system uses a Storch high strength overhead suspended
plate magnet housed in a severe duty industrial conveyor operating
in an inverted position.
Ferrous metals are magnetically pulled out of your non-ferrous
conveyed materials; ferrous materials collect on the self cleaning
magnetic separator belt and are conveyed and discharged to your
hopper. Storch self cleaning magnetic separators are designed to
eliminate or minimize any required maintenance compared to other
magnetic devices. May be used in conjunction with Storch magnetic
pulleys maximizing separation results in your self cleaning Magnetic
Separator systems, consult Storch for assistance.
For Application Assistance or Quote, contact us by:
Phone: (734) 591.2200
Fax: (734) 591.2582
Email: info@storchmagnetics.com
|
