|
Powder, Bulk and Solid Magnets
|
 Inline
Magnets Hump-Pneumatic
|
 |
 Inline
Magnets - including: Hump - Elbow - Pneumatic - Gravity Type Magnet
Separators
Features:
-
Low maintenance, quick easy clean Magnetic Separators
-
Finest Magnetic Materials meeting or exceeding IMA/MMPA standards.
-
Utilizing Storch Hi Power Standard and Custom Plate Magnets
or Bullet style.
-
High performance Strontium Ferrite permanent magnet ceramic
5 & 8A fully magnetized to 100% saturation with lifetime
guarantee of less than 1% loss in 100 years.
-
Rare Earth Neodymium (NdFeB) Pharmaceutical & Food Plate
Magnets available.
-
Optimized concentrated Magnetic Circuitry for your product
flows.
-
Mild & 304 Stainless Steel or full Stainless Steel Construction.
-
Complete with gasket seals, hinge(s), latch/lock mounts and
access hardware.
Hump, Half Hump, and 90° Elbow Magnet Separators
Since most applications are unique Storch Manufactures Hump Magnets
to your exact requirements and does not restrict you to a few standard
sizes or configurations. Please contact Storch Engineering to assist
you in designing the most effective Hump Magnet Separator housing
to your application.
Hump Magnets are very powerful and used in protecting your handling
facilities, product and processing equipment from tramp iron hazards-fine
ferrous fragments, shavings, nuts, bolts, and mavericks such as
wrenches, screwdrivers and hammers from even free-flowing, clumping
or bridging type materials. Effective tramp metal recovery with
dog-leg configuration forces product flow contacting the plate magnets
directly. Simple cleaning: swing plate magnet from housing to wipe
away contaminated metal recovery away.
 Round
Pipe Separators with Single Rectangular
Plate Magnets or Round Bullet Magnet Separators
Provided with inlet adapter to match your existing tube or pipe
to carry dry material across the plate magnet penetrating field
entrapping tramp metal while product transitions back to your chute.
Material flow is stopped for tramp metal recovery from hinged Plate
Magnet or Bullet Magnet.
Twin Plate Deep Reach Extractor Magnet Separator Housings.
Exceptional where vertical chute space is limited, high product
flows exist and metal removal/recovery is effectively needed. Top
of housing has a diverter flowing materials across deep reach twin
plate extractor magnets that collect tramp metal until magnets are
swung out to remove tramp metal. Used in plastic, food, grain, feed,
machinery like pelletizers, packaging, hammer mills, and other processing.
For Application Assistance or Quote, contact us by:
Phone: (734) 591.2200
Fax: (734) 591.2582
Email: info@storchmagnetics.com
|
