Products

(Revision: 0) magnet, ceramic, horseshoe holding assembly, 0.375'' x 1.125'' x 2.375'' - #10-24 x 0.125'' tapped hole - dwg: E-1063

magnet, ceramic, horseshoe holding assembly , 0.563'' x 1.125'' x 2.375'' - two #10-24 x 0.875 studs

magnet, ceramic, horseshoe holding assembly, 0.563'' x 2.375'' x 2.750'' - counter bore hole for 1/4'' cap screw

magnet, ceramic, blueprint holder, 0.625'' x 1.125'' x 2.375'' - 23 lbs holding capacity - dwg: E-1198 with Chrome Knob (bulk pack)

magnet, ceramic, assembly, 0.250'' x 0.880'' x 1.000'' - channel (bulk pack)

magnet, ceramic, assembly, 0.460'' x 1.045'' x 2.700'' - ceramic channel - 2 3/16'' slots on 2 3/4'' centers

magnet, ceramic, assembly, 0.560'' x 1.063'' x 4.50'' - ceramic channel - 2 9/32'' holes on 4'' centers

magnet, ceramic, round assembly, 1.205'' x 0.188'' - nickel plated

magnet, ceramic, assembly, assembly, 1.400'' x 0.281'' - nickel plated - 0.188'' diameter through hole.

magnet, ceramic, assembly, 2.030'' x 0.313'' Chrome - 0.188'' diameter through hole

magnet, ceramic, assembly, 2.625'' x .375'' - 0.281'' through hole, nickel plated

magnet, ceramic, assembly, 3.200'' x 0.438'' - 0.281'' through hole - nickel plated

magnet, ceramic, assembly, 4.900'' x 0.500'' - 0.500'' through hole - chrome plated (bulk pack)

magnet, Neodymium 35, round, 0.750'' diameter x 0.750'' long - nickel plated.

magnet, Neodymium 38, block, 0.160'' x 0.340'' x 1.000'' - nickel plated

magnet, Neodymium 42, block, 0.250''H x 0.500''W x 0.500''L - nickel plated - with #6 counter bore on center on both sides of part.

magnet, Neodymium 35, block, 0.250'' x 1.000'' x 4.000'' - nickel plated.

magnet, Neodymium 42, Block, 1.000'' x 1.000'' x 0.500'' - nickel plated - with #10 counter bore on center on both sides of part

magnet, Neodymium 35, block, 0.200'' x 0.375'' x 0.500'' - nickel plated with 0.095'' diameter hole and 0.200'' diameter x 0.100'' deep counter bor...

magnet, Neodymium 35, block, 0.250'' x 0.500'' x 0.750'' - nickel plated

Neodymium disc magnet 0.250" dia. x 0.250" thick, nickel plated, Grade 42, hi temp, good up to 302 degrees F.

1 1/2" L x 1/2" W x 1/4" thick w/ holes to accept #6 screws counter sunk from both sides, grade 42 Ni

magnet, Neodymium 42, channel assembly, 0.380'' x 0.750'' x 2.500'' - 2 #8 counter sunk holes on 1 3/4'' centers - nickel plated

magnet, Neodymium 42, ring, 0.375'' x 0.135'' x 0.125'' - nickel plated - #4 counter sink - North on counter sink face

magnet, Neodymium 42, ring, 0.375'' x 0.125'' x 0.125'' - nickel plated - #4 counter sink - South on counter sink face

magnet, Neodymium 42, ring, 0.500'' - 0.136'' x 0.125'' - nickel plated - with 82 degree counter sink #4 north on face

magnet, Neodymium 42, ring, 0.620'' x 0.170'' x 0.120'' - nickel plated - 0.170'' diameter through hole with #6 on North c-sink face.

magnet, Neodymium 42, ring, 0.620'' x 0.170'' x 0.120'' - nickel plated - 0.170'' diameter through hole with #6 South on c-sink face.

magnet, Neodymium 35H, round, 0.060'' diameter x 0.125'' long. Nickel plated

magnet, Neodymium 35, round, 0.093'' diameter x 0.250'' long - nickel plated

magnet, Neodymium 35, round, 0.110'' diameter x 0.250'' long - nickel plated

magnet, Neodymium 35, round, 0.120'' diameter x 0.060'' long - nickel plated with red dot on North face.

magnet, Neodymium 35, round, 0.125'' diameter x 0.125'' long - nickel plated

magnet, Neodymium 35, round, 0.125'' diameter x 0.250'' long - nickel plated.

N42 Magnet .125'' Dia x .500'' long Ni plated

magnet, Neodymium 33H, round, 0.157'' diameter x 0.236'' long - nickel plated - high temp grade