Products

magnet, AlNiCo 5, horseshoe, 0.562'' x 1.625'' x 1.500'' - C type (bulk pack)

Base Magnet 1-5/16x2-3/16 - Base Magnet Alnico 5 Neoprene Covered, 1 15/16'' x 2 1/2'' with 1/4 Thru Hole for Mounting, 45# Plus of Holding Capacity.

magnet, AlNiCo 5, rotor, 1.250'' diameter x 0.750'' long - 6-side-pole - 30 degree angle - as cast - 24 lbs holding value

(Revision: 0) magnet, AlNiCo 5, holding assembly, 1.250'' diameter x 1.000'' long - tapped hole 1/4''-20

Tank Cleaner Mag 45# - Tank Cleaner Magnet, Magic CLEAN-OUT TOOL A permanent Neoprene covered alnico 5 magnet attached to a 48'' wooden handle w/d...

magnet, ceramic, block, 1.000'' x 2.000'' x 6.000''

magnet, ceramic, horseshoe holding assembly , 0.563'' x 1.125'' x 2.375'' - two #10-24 x 0.875 studs

magnet, ceramic, horseshoe holding assembly, 0.563'' x 2.375'' x 2.750'' - counter bore hole for 1/4'' cap screw

magnet, ceramic, blueprint holder, 0.625'' x 1.125'' x 2.375'' - 23 lbs holding capacity - dwg: E-1198 with Chrome Knob (bulk pack)

magnet, ceramic, assembly, 0.460'' x 1.045'' x 2.700'' - ceramic channel - 2 3/16'' slots on 2 3/4'' centers

magnet, ceramic, assembly, 0.560'' x 1.063'' x 4.50'' - ceramic channel - 2 9/32'' holes on 4'' centers

magnet, ceramic, round holding assembly, 1.000'' diameter x 0.750'' long - 3-pole with 1/4''-20 tapped hole 0.250 '' deep

magnet, ceramic, round holding assembly, 1.250'' diameter x 1.250'' long - 3-pole with 1/4''-20 tapped hole 0.250 '' deep

magnet, ceramic, assembly, 2.030'' x 0.313'' - black poly coated - 0.188'' diameter through hole

magnet, ceramic, assembly, 2.030'' x 0.313'' Chrome - 0.188'' diameter through hole

magnet, Neodymium 35, round, 0.750'' diameter x 0.750'' long - nickel plated.

magnet, Neodymium 35, block, 0.250'' x 1.000'' x 4.000'' - nickel plated.

magnet, Neodymium 42, Block, 1.000'' x 1.000'' x 0.500'' - nickel plated - with #10 counter bore on center on both sides of part

(Revision: 0) magnet, Neodymium 35, V'-block assembly, 0.500'' x 1.000'' x 1.000'' - 2-pole - dwg: E-5379

1 1/2" L x 1/2" W x 1/4" thick w/ holes to accept #6 screws counter sunk from both sides, grade 42 Ni

magnet, Neodymium, pot magnet, 0.625'' diameter x 0.500'' long - tapped hole #10-32

magnet, Neodymium 52, round, 0.750'' diameter x 0.250'' long - nickel plated

magnet, Neodymium 35, round, 0.750'' diameter x 0.500'' long

magnet, Neodymium 30, round, 1.000'' diameter x 0.250'' long. 

magnet, Neodymium 35, round, 1.000'' diameter x 0.250'' long - nickel plated

Neo Magnet, Grade 42, 1.00" dia x 0.250" thick, 8/32 stud on center, all nickel plated. 

magnet, Neodymium 35, round, 1.000'' diameter x 0.375'' long - nickel plated

magnet, Neodymium 35, round, 1.000'' diameter x 0.500'' long - nickel plated.

magnet, Neodymium, holding assembly, 0.750'' diameter x 0.500'' long - tapped hole 10-32.

magnet, Neodymium, assembly, 25mm OD x 7mm Thick - nickel plated with #6 threaded stud. (10mm stud, 17mm overall height)

magnet, Neodymium, assembly, 1.000'' x 0.375'' - knurled stainless-steel cup - `20 lbs. holding value.

NEO Assy 1.420 dia x .290'' lg, Nickel plated with 0.26 dia thru hole with 90 degree C-sink.

magnet, SmCo 2; 17, round, 0.750'' x 0.500''