Magnets > Shape > Round Magnets

magnet, ceramic, assembly, assembly, 1.400'' x 0.281'' - nickel plated - 0.188'' diameter through hole.

magnet, Neodymium, assembly, 0.800'' Diameter x 0.280'' Thick- nickel plated .160 Diameter through hole with 90-degree countersink.

magnet, Neodymium 42, round, 0.500'' diameter x 0.125'' long - nickel plated.

magnet, Neodymium 35, round, 0.313'' diameter x 0.250'' long - nickel plated

magnet, ceramic, round assembly, 1.205'' x 0.188'' - nickel plated

magnet, Neodymium 35, round, 0.375'' diameter x 0.500'' long - nickel plated

magnet, Neodymium 35, round, 0.500'' diameter x 0.125'' long - nickel plated - North with plus, South with minus

magnet, Neodymium 35, round, 0.375'' diameter x 0.187'' long - nickel plated

magnet, Neodymium 35, round, 0.320'' diameter x 0.250'' long - nickel plated

magnet, Neodymium 35, round, 0.187'' diameter x 0.250'' long - nickel plated (bulk pack)

magnet, Neodymium 35, round, 0.375'' diameter x 0.125'' long - nickel plated

magnet, Neodymium 35, round, 0.250'' diameter x 0.250'' long - nickel plated

magnet, Neodymium 35, round, 0.250'' diameter x 0.200'' long - nickel plated - North marked with red dot

magnet, Neodymium 52, round, 0.375'' diameter x 0.125'' long - nickel plated.

magnet, Neodymium 40, round, 0.187'' diameter x 0.187'' long - nickel plated

magnet, Neodymium 33H, round, 0.157'' diameter x 0.236'' long - nickel plated - high temp grade

magnet, Neodymium 35, round, 0.187'' diameter x 0.125'' long - nickel plated (bulk pack)

(Revision: 0) magnet, AlNiCo, round holding assembly, 2.125 dia x 1.25 long. 8-pole - brass encased - dwg: E 1341

magnet, ceramic, button, 4.000'' diameter x 0.620'' long - brass/epoxy - insulated - 1-pole - 3/8'' x 3/8'' tapped hole - dwg: E-1110

magnet, Neodymium, holding assembly, 1.250'' diameter x 1.000'' long - tapped hole 1/4''-20, plated cup plated magnet.

(Revision: 0) magnet, ceramic, round holding assembly, 0.875'' diameter x 1.250'' long - 3-pole

magnet, AlNiCo 5, round horseshoe, 1.375'' x 1.375''

magnet, ceramic, round holding assembly, 1.250'' diameter x 1.250'' long - 3-pole with 1/4''-20 tapped hole 0.250 '' deep

magnet, Neodymium 38, assembly, 1.000'' x 0.750'' - 1/4''-20 UNC tapped hole - brass Insulated - Ni-Cu-Ni plated cup and magnet - dwg: E-3687.

magnet, Neodymium, assembly, 1.000'' x 0.375'' - knurled stainless-steel cup - `20 lbs. holding value.

magnet, AlNiCo 5, holding assembly, 0.750'' diameter x 1.250'' long - tapped hole #10-32

magnet, ceramic, round holding assembly, 0.625'' diameter x 1.000'' long - 3-pole with #10-24 tapped hole 0.186 '' deep

magnet, ceramic, round holding assembly, 1.000'' diameter x 0.750'' long - 3-pole with 1/4''-20 tapped hole 0.250 '' deep

magnet, ceramic, round holding assembly, 0.875'' diameter x 1.000'' long - 3-pole with 1/4''-20 tapped hole 0.250'' deep

magnet, AlNiCo 5, rotor, 1.250'' diameter x 0.750'' long - 6-side-pole - 30 degree angle - as cast - 24 lbs holding value

magnet, Neodymium, pot magnet, 0.625'' diameter x 0.500'' long - tapped hole #10-32

magnet, Neodymium, assembly, 0.625'' x 0.375'' - knurled stainless-steel cup - 11.5 lbs. holding value

magnet, AlNiCo 5, rotor, 1.000'' diameter x 0.750'' long - 4-side-pole - 45 degree angle - as cast - 16 lbs holding value

magnet, Neodymium, holding assembly, 0.750'' diameter x 0.500'' long - tapped hole 10-32.

magnet, Neodymium, pot magnet, 0.500'' diameter x 0.375'' long - tapped hole.

magnet, AlNiCo 5, holding assembly, 0.375'' diameter x 1.000'' long - tapped hole #8-32